Qty |
PN |
Description |
Price |
| 1 |
VPP403 |
7.5" 6 groove Serpentine Vacuum Pump Pulley
New, never used 2 small nicks in front face from shipping. Nicks have been ground down flush and polished.
Image |
$100.00 |
| 25 |
CM200 |
Old Design Crank Mandrel, Small Block Chevy, mandrel only - no spacer, end cap or bolt
Image |
$50.00 |
| 25 |
CM200 |
Old Design Crank Mandrel, Small Block Chevy, mandrel including spacer and end cap
Image |
$79.00 |
| 20 |
VP104A |
Old Design with Iron Back "Super Pro" Series Vacuum Pump, 3-Vane (6" deep by 5" diameter). Tested at 23" to 25" hg and 28 CFM. Inlet & Outlet on side of pump. Pulley and brackets not included. This are the VP104A Super Pro Pumps that have been discontinued, replaced by VP104N our latest pump. |
$319.00 |
1 |
N/A |
Used TCI PG shield, SFI stamped August 2008. I had to grind a notch in the ¼” piece in order to have the shift cable clear it. Was on the car for 2 months, it is certified for 5 years. Paid $250 New. (Photo) |
$150.00 |
1 |
N/A |
Dominator is a 1050 3 circuit carb I used it for about 1 year. It flows 1120 cfm and was built by Nickerson performance in Penn. I have over $1300 in it.(Photo) | $700.00 |
1 |
N/A |
50 Amp single wire Hitachi remanufactured alternator, never used |
$85.00 |
